Underlay is the soft layer that goes under laminate or wood flooring. It makes the floor quieter, warmer and more even. It is sold by the roll, so you need to turn your room size into a number of rolls before you shop. This free calculator does that. Enter your room length and width, and the coverage of one roll, and it tells you how many rolls and how much tape you need. It adds 10 percent extra for cuts and waste, so you do not run short halfway through the job.
How to use the underlay calculator
Measure your room length and width in metres, and enter them in the tool. Then enter the coverage of one roll, which is printed on the roll packaging, often 10 square metres. Click Calculate. The tool shows your room area, the number of rolls, and the number of tape rolls for the seams. The result updates as you type, so you can try different roll sizes. If your room is L-shaped, measure it as two rectangles and add the two areas together, then enter the total area as a room of the same size.
Worked example
Take a living room that is 5 metres long and 4 metres wide. The area is 20 square metres. You buy rolls that cover 10 square metres each. The tool adds 10 percent for waste, so it plans for 22 square metres. That needs 3 rolls, because 2 rolls would cover only 20 square metres and leave nothing for cuts. For tape, the tool counts one roll for each 25 square metres, so a 20 square metre room needs 1 roll of tape. The answer is 3 rolls of underlay and 1 roll of tape. If the room had awkward corners or a bay window, you would buy one spare roll as well.
Where this calculator helps
This calculator helps before you buy and while you work. At the shop, it stops you buying too little and making a second trip, or buying far too much and wasting money. For a whole house, run the tool once per room and add the rolls together. Builders use it to quote a job, because the roll count feeds straight into the price. Renters who lay flooring in one room use it to keep the cost low and the job simple.
Limits to know
The 10 percent waste figure is a common guide, not a rule for every room. A square room wastes less, and a room with many corners, doorways or a bay window wastes more. The tape figure is also a guide: one roll per 25 square metres works for normal seams, but wide rooms with many joins may need more. Always check the roll coverage on the packet, because brands differ. This tool does not check your subfloor, and a damp or uneven subfloor needs fixing before any underlay goes down.
Frequently asked questions
What is flooring underlay? It is a thin foam or fibre layer that sits between the subfloor and the flooring. It softens footsteps, evens out small bumps, and adds a little warmth.
Do I need underlay for every floor? Laminate and engineered wood usually need it. Solid wood and some vinyl planks may not, so check the flooring instructions first.
Why add 10 percent extra? Cutting underlay to fit around walls, doors and corners creates offcuts you cannot reuse. The extra 10 percent covers that waste.
What tape do I need? Use the tape made for underlay, often called jointing tape. It seals the seams so the underlay does not move or let damp through.
Also available in Spanish: Cuánta base necesito para el suelo.
