What this colour mixer does
Mixing two colours sounds simple, but guessing the result is hard. Red and blue make purple, but which purple depends on how much of each colour you use. This free tool blends any two colours by a ratio you choose, and it shows the result at once as a big swatch with its hex code and RGB values.
You pick the first colour, the second colour, and the mix ratio with a slider. At 50 percent you get a true half-and-half mix. At 25 percent the result stays close to the first colour, with just a touch of the second. At 75 percent the second colour takes over. The tool updates live as you move the slider, so you can watch the shade change step by step.
How to use it
Click the first colour box and pick a colour from the picker, or type a hex code if you know it. Do the same for the second colour. Then drag the ratio slider. The middle swatch shows the mixed colour, and the two outer swatches show your starting colours so you can compare them side by side.
The result line gives you the hex code, such as #800080, and the RGB values, such as RGB 128, 0, 128. Copy the hex code straight into your design tool, website, or presentation. If the mix is not quite right, nudge the slider a little. Small moves near 50 percent change the colour a lot, so try 40 or 60 percent before you settle.
Worked example: red and blue at 50 percent
Take pure red, #FF0000, and pure blue, #0000FF, with the slider at 50 percent. The tool blends each channel halfway: red goes from 255 to 128, green stays at 0, and blue goes from 0 to 128. The result is #800080, a medium purple, shown as RGB 128, 0, 128.
Move the slider to 25 percent and the mix becomes #BF0040, a red-purple that leans strongly toward red, with RGB 191, 0, 64. Move it to 75 percent and you get #4000BF, a blue-purple at RGB 64, 0, 191. The same two colours give three very different results, which is why the ratio slider matters. A brand designer picking a purple for a logo would test all three before choosing.
Use cases
Designers use the tool to find the exact shade between two brand colours, for example a gradient midpoint for a website button. Teachers use it to show children how colours blend, because the live slider makes the idea clear. Homeowners use it to plan a paint colour between two paint samples. Crafters use it to match thread, yarn, or clay colours before they buy.
It also helps when a client says “make it a bit bluer” and you need a number, not a guess. Move the slider until the swatch looks right, then hand over the hex code. The whole team then uses the same colour, instead of five different purples.
Honest limitations
The tool blends colours in RGB space, which is how screens mix light. Real paint works differently: paint subtracts light, so two paints mixed in a pot can look darker or muddier than the screen shows. The hex code is exact for screens, but a printed colour depends on your printer and paper, so always test a print before a big run. The tool also works with one pair at a time, so a three-colour blend needs two steps: mix the first two, then mix that result with the third.
Frequently asked questions
What does 50 percent mean? It means half of each colour. The result sits exactly halfway between the two colours in RGB space.
Why does my paint mix look different? Screens add light and paint subtracts it. The tool shows the screen result, which is the right guide for digital work.
Can I use the hex code in my website? Yes. Copy the code, such as #800080, into your CSS or design tool and it will show the same colour.
Is the tool free? Yes. It is free, with no account and no sign-up.
También disponible en español: Mezclar Dos Colores en Línea
