A workbench needs three parts: a top to work on, four legs to stand on, and a lower shelf to hold tools and wood. This free calculator counts the lumber for all three. Enter the length, depth, and height of your bench, and the tool tells you how many boards you need for the top, how many for the lower shelf, how many legs, and the total length of lumber to buy. It runs in your browser, needs no sign-up, and works in metres.
How to use the calculator
Enter the length of the bench in metres, for example 1.8. Then enter the depth, for example 0.6. Then enter the height, for example 0.9. Click the Calculate lumber button, or just type: the answer updates as you type. The tool shows the board counts for the top, the shelf, and the legs, plus the total length of lumber in metres. The bar chart below compares the three parts at a glance, so you can see where most of the wood goes.
Worked example
You want a bench 1.8 metres long, 0.6 metres deep, and 0.9 metres high. The tool says you need 5 boards for the top, 4 boards for the lower shelf, and 4 legs, with a total lumber length of 19.8 metres. The maths is simple: the top uses boards about 14.5 centimetres wide, so 0.6 metres of depth needs 5 boards, each 1.8 metres long. The lower shelf takes one board fewer, which is 4 boards of 1.8 metres. The legs are 4 pieces of 0.9 metres. Add it up: 9 plus 7.2 plus 3.6 is 19.8 metres. Buy 22 metres to allow for cuts.
Why the top needs so many boards
A workbench top is made of boards laid side by side, not one wide slab, because wide slabs are expensive and they warp. Standard boards are about 14.5 centimetres wide, so the number of boards is the depth divided by 0.145, rounded up. A bench 0.6 metres deep needs 5 boards. A bench 0.75 metres deep needs 6 boards. A bench 0.45 metres deep needs 4 boards. The boards run along the length of the bench, so each board is as long as the bench itself.
Why the lower shelf takes one board fewer
The lower shelf sits between the legs, so it is slightly narrower than the top, which overhangs the legs on each side. That is why the shelf takes one board fewer than the top. The shelf is not just storage: it braces the legs and stops the bench from wobbling side to side. A bench without a lower shelf needs diagonal braces instead, which use extra wood and take more time to fit. The shelf is the simplest way to make a bench stiff.
Choosing the right lumber
Pine is the cheapest common choice for a workbench and is easy to cut and screw. Use boards at least 18 millimetres thick for the top, or the top will dent under tools. For a heavy-duty bench, use 25-millimetre boards or double up two layers. The legs should be chunky: 90 by 90 millimetres is a good size. Avoid warped boards: sight along each board before you buy it and reject any that bend. Buy your lumber a few days early and let it sit in the workshop so it adjusts to the humidity.
Use cases
Home woodworkers use this calculator before their first bench build, when they have never bought lumber for a bench before. Garage owners use it to plan a bench along one wall. Schools use it to plan workbenches for a workshop class. Small businesses use it to cost a bench for a new workshop. Anyone replacing a wobbly old bench uses it to work out what to buy in one trip to the timber yard.
Common mistakes
The most common mistake is forgetting the lower shelf and buying only enough wood for the top and legs. Another mistake is buying boards that are too thin for the top: a thin top dents, bounces, and makes sawing hard. A third mistake is forgetting the saw cuts: each cut loses a few millimetres, and a board cut into legs loses length to the blade. A fourth mistake is building the bench too high or too low: 0.9 metres suits most people, but if you are tall, add 5 centimetres.
Limitations
This calculator counts boards and total length from your bench size. It assumes boards 14.5 centimetres wide, a lower shelf one board narrower than the top, and 4 legs. It does not count screws, glue, braces, or a vice, and it does not know the price of lumber at your yard. It does not check whether your floor is level or whether your bench will fit through the door. For a very heavy bench, such as one for a metal vice or an anvil, use thicker boards than the calculator assumes.
Frequently asked questions
How many boards does the top need? The depth divided by 0.145, rounded up: a 0.6-metre-deep bench needs 5 boards. Why does the shelf take one board fewer? Because it sits between the legs, while the top overhangs them. How many legs does a bench need? Four, one at each corner. What height should a workbench be? 0.9 metres suits most people; taller people should add 5 centimetres.
También disponible en español: Cuánta madera para un banco de trabajo – Tablas según el tamaño del banco, gratis en línea
