A shower curtain liner keeps water off your bathroom floor, but it spends its life wet, warm, and folded in on itself. That is exactly what pink mould loves. The good news is that most liners can be washed, and a regular clean keeps the pink spots from coming back. Here is how to clean yours, by material, and how to stop the pink mould for good.
Quick overview: What it is: washing a shower curtain liner and removing pink mould. Time needed: 30 to 60 minutes, mostly waiting. What you need: liquid detergent, white vinegar, baking soda, an old towel, and, for pink mould, diluted bleach or oxygen bleach. Check the care label first — the material decides the method.
Step 1: Identify your liner material
Most liners are made from one of three materials, and each one has different washing rules.
- PEVA or EVA (soft, flexible plastic): The most common type. Machine-washable on a gentle cycle, but never tumble dry.
- PVC or vinyl (stiffer, heavier plastic): Hand-wash or gentle machine cycle. Keep water warm, not hot, and never tumble dry.
- Polyester fabric: The easiest to care for. Machine-washable on warm and usually tumble dry on low, but check the label first.
- No label, or unknown material: Treat it like vinyl. Hand-wash in warm water and hang to dry.
If the liner feels sticky, stiff, or cracked, washing will not restore it. Replace it.
Step 2: Machine-wash method (PEVA, PVC, and fabric liners)
- Remove the liner from the hooks. Take it down and shake off any loose dirt over the bath or outside.
- Put it in the machine with two old towels. The towels stop the liner from folding into a tight ball and add gentle scrubbing action.
- Add half a cup of white vinegar to the drum. Vinegar helps dissolve soap scum and mildew. Use your normal amount of liquid detergent as well.
- Wash on a gentle cycle with warm water. For fabric liners, warm water is fine. For PEVA and PVC, use a cool or warm cycle — never hot.
- Take the liner out as soon as the cycle ends. Do not leave it sitting damp in the machine.
Step 3: Hand-wash method (vinyl liners and delicate liners)
- Fill the bath with warm water and a tablespoon of liquid detergent. Hot water can warp plastic liners, so keep it warm to the touch.
- Submerge the liner and soak for 15 minutes. This loosens soap scum and surface grime.
- Scrub the worst areas with a soft brush or cloth. Pay attention to the bottom edge and the folds, where pink mould and soap scum collect first.
- Rinse with clean water. Run the shower over it, or drain the bath and refill with fresh water.
- Do not wring a plastic liner. Wringing creases and cracks it. Shake off the excess water instead.
Step 4: Removing pink mould
Those pink or orange streaks are usually not mould at all. They are a bacteria called Serratia marcescens, which grows in damp, soapy places. It is common in bathrooms and is not dangerous on a surface you do not touch with broken skin, but it looks unpleasant and spreads if left alone.
- For white or light-coloured plastic liners: Mix one part household bleach with ten parts water. Wipe or spray the pink areas, leave it for 10 minutes, then rinse well. Wear gloves and open a window or door. Never mix bleach with vinegar or any other cleaner.
- For coloured liners, or if you prefer not to use bleach: Make a paste of baking soda and a little water. Spread it over the pink areas, leave it for 15 minutes, then scrub and rinse. Repeat once if the pink is still visible.
- For fabric liners: Soak in warm water with oxygen bleach for 30 minutes, then machine-wash as normal. Check the product label for the right dose.
- Check the bottom hem. Pink mould hides in the folded hem at the bottom. Turn it inside out and clean inside, or the pink will return within days.
If the pink stains have been there for months and do not lift after two treatments, they have soaked into the plastic. Replace the liner.
Step 5: Drying rules so it does not go musty
How you dry a liner matters as much as how you wash it. A liner that dries badly smells musty and grows pink mould again within a week.
- Hang it back up straight away. Rehang the liner on its hooks, spread fully open, so air can reach both sides.
- Leave the bathroom door open or the extractor fan running for an hour. Moving air is what dries a liner. A closed, steamy bathroom keeps it damp.
- Never put a plastic liner in the dryer. The heat melts, warps, and shrinks it. Fabric liners can go in on low heat, but hanging is still gentler and works well.
- Do not fold a damp liner. If you need to store a spare liner, make sure it is fully dry first. A folded damp liner goes musty in days.
Step 6: A prevention routine that takes two minutes
The simplest way to keep a liner clean is to stop it staying wet between showers.
- After every shower, pull the liner fully closed across the rail. A bunched-up liner stays wet in the folds. A spread-out liner dries.
- Once a week, spray the bottom half with equal parts white vinegar and water. Leave it for a few minutes, then rinse with the shower.
- Once a month, give the liner a full wash. Put it in with a load of towels, or hand-wash it in the bath.
- Replace the liner when it is cracked, stiff, or permanently stained. Even a well-cared-for plastic liner usually lasts about six months to a year.
Closing tip: Most liners fail because they stay bunched and damp, not because they are hard to clean. Spread it out after every shower, wash it monthly, and treat pink spots the moment they appear.
