A day at the sights often fails for one simple reason: the plan holds more hours than the day has. This free attraction time budget planner fixes that before you leave. You list the places, say how long you want at each one, and set your available hours. The tool then splits the hours fairly.
Priority is what makes the split fair. A must-see place deserves more time than a nice-to-have stop. The tool gives must-see places the largest share, then should-see places, then nice-to-have places. That way the best sights never lose out to a minor stop you added on a whim.
To use it, write one attraction per line with wanted hours and a priority word: must, should or nice. Then enter your available hours for the day. The result shows planned hours for every place, plus any hours left unassigned. Nothing is hidden in the maths.
When wanted hours fit inside the day, the split is simple. Each place gets close to what you asked for, shaped by its priority. When wanted hours exceed the day, the tool trims the lower priorities first. Your must-see places keep most of their time, which is exactly how a good day should work.
Take an example. A museum wants four hours and is a must-see, a castle wants two hours and is a should-see, and a park wants two hours and is nice to have. With six hours available, the tool gives three, two and one hours. The museum leads, the castle holds, and the park still gets a short visit.
Be strict with the must label. If everything is a must, the label means nothing and the split turns flat. Pick two or three true must-see places per day at most. Everything else should fight for the remaining hours, and some of it can wait for another trip.
Available hours should mean real sightseeing hours, not the whole day. Remove travel between places, meals, queues and rest breaks first. If you leave home at nine and return at six, you may have only six true sightseeing hours. Planning with the smaller number keeps the day honest.
A common mistake is adding a place because it is near another one. Near does not mean free. Every stop costs time, even a short one, because entry, walking and photos all add up. If the tool shows zero hours left, the honest move is to drop a stop, not to squeeze it in.
Run the tool again when plans change. A closed museum, a long queue or a late start all change the maths. Enter the new available hours and the new list, and you get a fresh split in seconds. Replanning beats rushing every time.
The tool works in your browser with no account and no sign-up. Your list stays on your own device. Use it for one city day, a museum day, or a full holiday week, one day at a time.
A good sightseeing day ends on time, with the best places properly seen. Set priorities first, budget the hours second, and let the lower-priority stops fit around what matters most.
Buy tickets in advance for your must-see places when that option exists. A two-hour queue is not sightseeing time, and it destroys even a careful budget. Skipping the line gives those hours back to the places themselves, which is the whole point of planning.
Keep a short list of free or cheap nice-to-have places near your must-see stops. If a must-see visit ends early, a nearby park or viewpoint fills the gap without travel. If it runs long, you simply skip the filler and lose nothing important.
Review the day in the evening and note what actually happened. Maybe the museum needed three hours, not two, or the castle took only one. Those notes make the next day's budget far more accurate, and after a few days you will budget like a local guide.