Why buttons need even spacing
Buttons hold a garment shut, and they only work when they are spaced evenly. If the gaps are uneven, the fabric pulls and gapes between the wide gaps, and the buttons near the tight gaps strain. Even spacing spreads the pull across the whole front, so the garment sits flat.
The count is simple maths. Divide the opening by the spacing, and add one button, because there is a button at each end. A 60 cm opening with 10 cm spacing needs 7 buttons: one at 0, one at 10, 20, 30, 40, 50 and one at 60. Then add one spare, because a lost button with no spare means a trip to the shop.
How to use the calculator
Measure the opening where the buttons will sit, from the first button position to the last, and type that number in the first box. Then type the spacing you want between buttons in the second box. Ten centimetres is normal for a shirt or a dress, 8 cm is closer for a fitted garment, and 12 cm is wide for a light blouse.
Pick centimetres or inches, then press the button. The result tells you how many buttons to sew on and how many to buy, with one spare included.
Worked example
Take a shirt front of 60 cm with 10 cm spacing. Divide 60 by 10 to get 6 gaps, add one button for the end, and you get 7 buttons. Buy 8, with one spare. Take a dress front of 45 cm with 9 cm spacing. Divide 45 by 9 to get 5 gaps, add one, and you get 6 buttons. Buy 7.
Take a coat front of 100 cm with 12 cm spacing. Divide 100 by 12 to get 8.33, round down to 8 gaps, add one, and you get 9 buttons. Buy 10. The rounding down is safe, because the last gap is a little shorter than the rest, and the buttons still look even.
Who uses this calculator
Home sewers use it most, when they sew a shirt, dress, cardigan or coat and need to buy buttons before they start. It saves a second trip to the shop, because buying too few buttons is the most common button mistake.
It also helps people replacing all the buttons on a garment, who want the new buttons to sit in the same places as the old ones. Measure the opening, type the old spacing, and the count comes out the same.
Honest limitations
This tool counts buttons by spacing only. It does not check button size: a very large button needs wider spacing, or the buttons will overlap, and a very small button can sit closer together. Check the button against the spacing before you buy.
It also assumes the spacing is the same all the way down. Some garments use closer spacing at the bust or waist, where the pull is strongest, and wider spacing elsewhere. If your pattern says that, follow the pattern, not the tool.
Frequently asked questions
Why add one button to the count? Because there is a button at each end of the opening. Dividing the length by the spacing gives the number of gaps, and the number of buttons is always one more than the number of gaps.
Why buy a spare button? Because buttons break and fall off, and matching buttons are hard to find later. Sew the spare inside the garment, at the hem or on the facing, so it is there when you need it.
What spacing should I use? 8 to 10 cm is normal for shirts and dresses, 10 to 12 cm for light blouses and cardigans, and 12 to 15 cm for coats. Closer spacing holds better, wider spacing looks airier.
Does button size change the count? No, but it changes the look. A big button needs more room, so do not use a 3 cm button with 5 cm spacing, or the buttons will touch.
También disponible en español: Cuántos botones necesito – Cantidad según la prenda y el espaciado, gratis en línea
