Also available in Spanish: Calculadora de Tamaño de Patrón de Punto de Cruz – De Puntos a Pulgadas, Gratis
What this tool does
Every cross stitch pattern gives its size in stitches, but nobody buys a frame in stitches. This free calculator turns stitch counts into real inches and centimetres. You type the width and height of the pattern in stitches, pick your fabric count, and the tool gives the finished size of the stitched area. It works for Aida 14, 16 and 18, plus 11 count and 28 count over two threads. The answer comes in both inches and centimetres, so you can shop for fabric and frames anywhere. The tool also tells you how big to cut the fabric, with a border left spare on each side.
How the maths works
The maths is one division. The fabric count tells you how many stitches fit in one inch. On 14 count Aida there are 14 stitches per inch, so a pattern 140 stitches wide is 140 divided by 14, which is 10 inches. On 18 count the same pattern is 140 divided by 18, which is 7.8 inches. A higher count means smaller stitches and a smaller finished piece. The tool does the same division for the height, then multiplies by 2.54 to give centimetres. The bar shows where the width sits between zero and 20 inches, so you can see at a glance whether the piece is small, medium or large.
Worked example
A pattern is 140 stitches wide and 100 stitches high, and you stitch it on 14 count Aida. Type 140, 100 and 14 into the tool. The width is 140 divided by 14, which is 10 inches, or 25.4 centimetres. The height is 100 divided by 14, which is 7.1 inches, or 18.1 centimetres. The tool gives 10 by 7.1 inches, and says to cut the fabric at least 16 by 13.1 inches, because it adds three inches of spare fabric on each side for framing. Stitch the same pattern on 18 count and the size drops to 7.8 by 5.6 inches, which is a much smaller frame.
How to use the calculator
Find the stitch counts on your pattern chart. They are usually written at the top, like 140 wide by 100 high. Type the width into the first box and the height into the second. Pick the fabric count from the list. If you stitch over two threads on linen, pick 28 count, because 28 over two works out the same as 14 stitches per inch. Press the button. The result shows the finished size in inches and centimetres. The meaning line says whether the piece is small, medium or large, and the next step line gives the fabric size to cut.
Use cases
Stitchers use it before starting a pattern, to check whether the finished piece will fit the frame or hoop they have in mind. It helps when choosing fabric, because the same pattern can be a wall hanging on 11 count or a card topper on 18 count. Gift makers use it to check that a piece will fit a standard frame size, so they do not need a custom frame. It also helps when a pattern gives only stitch counts and you are shopping online for the right cut of fabric.
Honest limitations
This tool gives the size of the stitched area only. It does not count the unstitched border, which you must add yourself. The tool adds three inches per side as a guide, but framing styles differ, and some need more. The maths assumes even tension. If you stitch tightly, the piece may end up slightly smaller, and if you stitch loosely it may end up slightly bigger. Fabric counts are standard, but real fabric can vary a little from the label. Always measure your own stitching after the first few rows if the exact size matters for a frame you already own.
Frequently asked questions
What does fabric count mean? It is the number of stitches that fit in one inch of fabric. Aida 14 has 14 stitches per inch. A higher count means smaller stitches and a smaller finished piece for the same pattern.
How much spare fabric should I leave? At least three inches on each side, which is six inches added to the width and the height. That gives enough to hold in a hoop and to frame without pulling the stitches.
What is 28 count over two? On linen, many stitchers work over two threads instead of one. On 28 count linen worked over two, the stitches come out the same size as 14 count Aida, so the tool treats it as 14 per inch.
Does the tool work for other crafts? The same maths works for any counted work, like needlepoint on canvas, as long as you know the count per inch. Just pick the count that matches your canvas.

Pingback: Calculadora de Tamaño de Patrón de Punto de Cruz – De Puntos a Pulgadas, Gratis