Why blackout curtains need extra fabric
A curtain that lies flat against the window looks like a sheet, not a curtain. The soft folds that make a curtain look good come from fullness: you use more fabric than the window is wide, and the extra fabric gathers into folds. A fullness of 2 means you use twice the window width, which is the classic look for most rooms.
Blackout curtains need a second layer too. The face fabric is what you see, and the blackout lining is what blocks the light. The lining needs the same metres as the face fabric, because it hangs behind it in the same folds. That is why this tool counts the lining separately: a window that needs 7.2 metres of face fabric needs 7.2 metres of lining as well.
How to use the calculator
Measure the window first. The width is the finished width of the curtains when they are closed, and the drop is the finished length from the top of the curtain to the floor or the sill. Enter the fullness: 1.5 is flatter and cheaper, 2 is the classic look, and 2.5 is fuller and richer.
Enter the width of your fabric, which is usually 140 cm for home fabric. The lining box is ticked by default, because a blackout curtain without a lining is just a normal curtain. Press the button, and the tool shows the metres of face fabric, the metres of lining, the number of panels, and the cut length.
Worked example
Take a window 200 cm wide and 220 cm tall, with a fullness of 2 and fabric 140 cm wide. The fabric width you need is 200 times 2, which is 400 cm. The fabric is 140 cm wide, so 400 divided by 140 is 2.86, which rounds up to 3 panels.
The cut length is the drop plus 20 cm for hems, which is 240 cm. Each panel is 240 cm long, and there are 3 panels, so the face fabric is 3 times 240, which is 720 cm, or 7.2 metres. The blackout lining is the same again, 7.2 metres, so the total is 14.4 metres of fabric for the whole window.
Who uses this calculator
Home sewers use it most, because curtains are one of the biggest sewing projects in a house, and fabric is too expensive to guess. If you buy too little, the curtains hang flat and thin, and if you buy too much, you waste money on fabric that sits in a cupboard.
It also helps curtain makers who quote a job, because they need a fabric number before they can give a price. Parents making blackout curtains for a nursery use it to get the light-blocking right, and anyone making curtains for a whole house will find it saves a lot of measuring and re-measuring.
Honest limitations
This tool assumes plain fabric with no pattern to match. If your fabric has a big flower or stripe that must line up across panels, you need to add one pattern repeat per panel, which can be 30 to 60 cm extra. It also assumes a hem allowance of 20 cm in total, which covers a top and bottom hem.
The tool counts panels by width only, so a very wide window that needs a seam in the middle is counted correctly, but it does not plan where the seam falls. Always check the fabric width on the label before you buy, because some fabrics are 110 cm wide, not 140 cm, and that changes the panel count. The lining is counted as the same width, so check that too.
Frequently asked questions
What fullness should I pick? 2 is the classic look for most rooms. Use 1.5 for a small window or a tight budget, and 2.5 for a tall window or a formal room where you want rich, deep folds.
Do I really need a lining? For blackout curtains, yes. The face fabric alone blocks very little light. The lining is what makes the room dark, and it also protects the face fabric from sun damage.
What if my window is wider than the fabric? The tool counts extra panels for you. Panels are joined with a seam, and the seam should sit at the back of a fold where it is least visible.
Should I buy extra fabric? Yes, buy 10 cm extra if you can. It covers a cutting mistake and gives you fabric to test the fullness before you cut the real piece.
También disponible en español: Cuánta tela para cortinas opacas – Metros según el tamaño de la ventana, gratis en línea
