How Much Fabric Do You Need for Bunting?
Bunting is a string of small triangle flags sewn onto a tape, and it is one of the easiest sewing projects for a party, a wedding, or a classroom. The hard part is knowing how much fabric to buy. The number of flags depends on the length of the string, the width of each flag, and the gap between the flags. The fabric depends on the flag size, because each flag is a triangle cut from the cloth. This calculator turns the party length into a flag count, and the flag count into metres of fabric and metres of tape, so you can buy the right amount in one trip.
The tool works in three steps. First it counts the flags. It takes the bunting length in centimetres and divides it by the flag width plus the gap. A 5 metre string is 500 centimetres. With a flag 15 centimetres wide and a gap of 5 centimetres, each flag takes 20 centimetres of string, and 500 divided by 20 is 25 flags. Then it works out the fabric. Each flag uses a strip of cloth as tall as the flag, and the width of the strip is the flag width out of the 150 centimetre fabric width. For a flag 20 centimetres tall and 15 centimetres wide, each flag needs 20 divided by 100 times 15 divided by 150, which is 0.02 metres, so 25 flags need 0.5 metres. The tool adds 0.1 metres for seams and mistakes, giving 0.6 metres in total. Finally it works out the tape: the bunting length plus 0.6 metres, which is 0.3 metres of spare tape at each end for tying.
How to Use the Calculator
Enter the length of bunting you want in metres. Five metres is a good length for a party table or a garden fence. Then enter the flag width and height in centimetres. A common flag is 15 centimetres wide and 20 centimetres tall. Then enter the gap between the flags. Five centimetres is a normal gap, and a bigger gap makes the bunting look lighter. Press the button and the tool shows the flag count, the fabric in metres, and the tape in metres, with bars that compare the three numbers. The tape bar is the longest, because the tape runs the whole length of the string.
Worked Example: 5 Metres of Bunting
Take 5 metres of bunting, with flags 15 centimetres wide, 20 centimetres tall, and a gap of 5 centimetres. Each flag takes 15 plus 5, which is 20 centimetres of string. The string is 500 centimetres long, so 500 divided by 20 is 25 flags. For the fabric, each flag needs 20 divided by 100, which is 0.2, times 15 divided by 150, which is 0.1, giving 0.02 metres per flag. Twenty five flags need 0.5 metres, plus 0.1 metres for seams, giving 0.6 metres of fabric. For the tape, 5 metres plus 0.6 metres of ends gives 5.6 metres.
When This Calculator Is Useful
It is useful before a party, when you want to know how much fabric to buy for the decorations. It is useful for weddings, where bunting often runs along a whole garden fence and the length is long. It is useful for teachers and classrooms, where bunting is a cheap way to decorate a room. It is useful for budgeting too: if the fabric costs 8 dollars a metre, 0.6 metres costs about 5 dollars, and the tape costs a few dollars more, so a 5 metre string of bunting costs well under 10 dollars in materials.
Honest Limitations
The numbers are estimates for triangle flags on 150 centimetre wide fabric. Your flag shape may differ. A rectangle flag uses more fabric than a triangle of the same size, because a triangle wastes half of its rectangle. A flag with a pocket or a fold over the tape needs a little more fabric again. If your fabric is only 110 centimetres wide, you will need more length, because fewer flags fit across the width. The tool rounds the flag count down to whole flags, so the last bit of string may be a little shorter than the length you asked for. Always check the amount against your own pattern, and buy a little extra fabric if your flags have a print that needs matching.
Frequently Asked Questions
How many flags fit on 5 metres of bunting? It depends on the flag width and the gap. With flags 15 centimetres wide and a gap of 5 centimetres, 25 flags fit on 5 metres. With wider flags or a bigger gap, fewer flags fit.
Why does the tape need to be longer than the bunting? The tape needs about 0.3 metres spare at each end for tying the bunting to a fence, a wall or a tree. Without the spare ends, you cannot tie it up.
Does the tool work for paper bunting? The flag count and the tape length work for paper too, because they depend only on the length and the flag size. The fabric amount does not apply to paper, because paper is bought by the sheet, not by the metre.
Also available in Spanish: Cuánta tela para banderines – Metros según la cantidad de banderines, gratis en línea
