How a cushion cover is cut
A cushion cover has two sides, a front and a back, so you need twice the cushion height in fabric, plus a little extra. This tool adds 5 cm to the height for seams and ease, doubles it for the two sides, and adds 20 cm if you want a zip. The width of the fabric roll, usually 150 cm, is wide enough for most cushions, so the length is the number that matters.
Measure the cushion pad itself, not an old cover, because covers shrink in the wash and old covers lie. A standard square cushion is 45 by 45 cm, a large one is 60 by 60 cm, and a lumbar cushion is wider than it is tall, often 50 by 30 cm.
How to use the calculator
Type the cushion width and height in centimetres, then pick your closure. A zip gives a neat finish and lets you take the cover off to wash it. An envelope back has no zip: the back is two overlapping pieces, which is easier to sew and cheaper, but it can gape open a little.
The tool shows the metres to buy, rounded up to the nearest tenth. The bar shows where your amount sits on the usual range, from a small cushion under a metre to a big cushion near two and a half metres. If you are making more than one cover from the same fabric, multiply the result by the number of covers.
Worked example
Take a standard cushion, 45 by 45 cm, with a zip. The height plus 5 cm is 50 cm. Two sides need 100 cm, and the zip allowance adds 20 cm, giving 120 cm, which is 1.2 metres. That is what you buy. Without a zip, the same cushion needs 100 cm, which is 1.0 metres.
Now take a large cushion, 60 by 60 cm, with a zip. The height plus 5 cm is 65 cm, two sides need 130 cm, and the zip adds 20 cm, giving 150 cm, which is 1.5 metres. A very wide cushion, 150 cm wide, needs double the length, because the width no longer fits on one roll width: a 50 cm tall cushion that wide needs 2.6 metres with a zip.
Who sews cushion covers
Home sewers make cushion covers to refresh a room without buying new cushions. A new cover changes the whole look of a sofa for the price of a metre of fabric, and it can be swapped with the seasons: bright colours in summer, warm colours in winter.
Cushion covers are also one of the best first sewing projects. The shape is simple, the pieces are flat, and a zip is the only tricky part. Many people sew their first cover with an envelope back, then try a zip on the second one once they trust their machine.
Honest limitations
This tool gives a fabric length for one plain cover on a 150 cm wide roll. A patterned fabric that must match across the front and back needs more, because you have to line the pattern up before you cut. A cushion with piping, buttons or a deep box edge needs more too.
The 5 cm seam allowance covers a plain cover. If you like a loose, soft cover, add another 2 cm per side. If your fabric shrinks, wash it before you cut, or the finished cover will be too tight for the pad.
Frequently asked questions
How much fabric do I need for a 45 cm cushion cover? 1.2 metres with a zip, or 1.0 metres with an envelope back, from a standard 150 cm wide roll. That covers two sides of 45 by 45 cm plus seams.
Should I use a zip or an envelope back? A zip looks neater and stays shut, but it costs more and takes more skill. An envelope back is easier and cheaper, and it works well for cushions that sit still on a sofa.
What fabric is best for cushion covers? Cotton, linen and soft furnishing fabrics work well. Avoid thin dress fabric, which wears fast, and avoid very thick fabric, which is hard to turn inside out after sewing.
How long should the zip be? About as long as the cushion width, or a little less. For a 45 cm cushion, a 40 cm zip is a good fit, and it leaves room to turn the cover the right way out.
También disponible en español: Cuánta tela para una funda de cojín – Metros según el tamaño del cojín, gratis en línea
