How Many Fence Pickets Do I Need – Pickets by Fence Length, Free Online

A fence is mostly pickets, and the number of pickets is the number most people get wrong. Buy too few and the fence has a gap at the end. Buy too many and money sits in the yard as spare wood. This free tool counts fence pickets by fence length. Enter the fence length, the picket width, the gap between pickets, and the gate width, and the tool gives you the pickets, the rails, and the posts.

The tool works from a simple rule. Each picket takes up its own width plus the gap next to it. Divide the fence length by that pitch and you get the pickets. The gate width comes off the fence length first, because the gate is not fenced with pickets. Rails run behind the pickets, two per fence section, and posts go every 2.4 metres to hold the fence up.

How to use the calculator

Enter the fence length in metres, the full run of fence you plan to build. Enter the picket width in centimetres, usually 10 to 15 cm. Enter the gap between pickets in centimetres. A gap of zero means pickets touch each other. A gap of 2 cm gives a classic picket look with light coming through. Enter the gate width in metres, or zero if there is no gate. Press Count the pickets. The big result shows the pickets. Below it, the tool shows the rails and posts, and how many pickets you need per metre of fence.

Worked example

Take a fence 30 metres long, with pickets 14 cm wide, a gap of 2 cm, and a gate 1 metre wide. First take off the gate: 30 minus 1 is 29 metres of fence to fill with pickets. Each picket takes 14 plus 2, which is 16 cm, or 0.16 metres. Divide 29 by 0.16 and you get 181.25, which rounds up to 182 pickets. The rails are 2 per 2.4-metre section, and 30 divided by 2.4 is 12.5, which rounds up to 13 sections, so 26 rails. The posts are 13 sections plus 1, which is 14 posts. That is about 6.1 pickets per metre. A smaller fence, 10 metres long with 10 cm pickets and a 1 cm gap and no gate, needs 91 pickets, 10 rails, and 6 posts.

Where this calculator helps

Home owners building their first fence use it before they go to the timber yard, so they buy once and build without stopping. Budget planners use it to price a fence, because pickets are the biggest cost. People replacing an old fence use it to count what they need for the same run. People hiring a builder use it to check a quote, because a builder who orders far more pickets than this tool suggests may be padding the bill. And people comparing picket styles use it to see how a wider picket or a bigger gap changes the total.

Honest limits

This tool counts a straight fence on flat ground. It does not count corner posts, end posts, or the gate frame, so add those on their own. It assumes all pickets are the same width and all gaps are the same size. A fence on a slope needs longer posts and may need stepped sections. The tool also assumes a standard picket height, so it does not count the length of each picket, only how many you need. Always buy 5 percent extra pickets for cuts and spares, because a few boards always arrive bent or split.

Questions people ask

What gap should I leave between pickets?

A gap of 0 to 2 cm is common. Zero gives full privacy. A 2 cm gap gives the classic picket look and lets light and air through. A bigger gap, 5 cm or more, looks open but gives little privacy.

Why round the pickets up?

You cannot buy a quarter of a picket. Rounding up to 182 from 181.25 means the last picket fills the last gap. The small extra is better than a hole at the end of the fence.

How far apart do posts go?

Every 2.4 metres is the standard used here, which matches common rail lengths. Closer posts make a stiffer fence, but they cost more.

Does the tool count the gate?

No. The gate width is taken off the fence length, because the gate is built separately. Buy or build the gate frame on its own.

También disponible en español: Cuántos piquetes necesito para una valla

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top