How Much Lumber for a Pergola – Posts and Beams by Size, Free Online

What a pergola is made of

A pergola is an open garden structure: four or six posts, two beams across the top, and a row of rafters that give shade and shape. It is simpler than a roof, because there is no solid cover, but it still needs the right lumber in the right amounts. Too few posts and the beams sag. Too few rafters and the shade has gaps. This calculator counts the four things a pergola needs: posts, beams, rafters and screws.

The maths follows the standard building pattern. Posts sit at the corners, and a pergola up to 12 feet long needs four posts, one at each corner. A longer pergola needs six posts, with a middle pair, because a beam longer than 12 feet sags in the middle without extra support. Beams run the full length, one on each side, so there are always two. Rafters sit 16 inches apart across the width, like deck joists, so the tool divides the width by 16 inches and adds one. Screws are four per rafter, where the rafter meets the beams, plus sixteen for the beam joints.

Getting this list right before you buy saves a second trip to the timber yard, and it stops you buying lumber you do not need. A clean list is what makes it a one-weekend project instead of a two-weekend one.

How to use the calculator

Enter the pergola length in feet, then the pergola width in feet. Press the button and the tool shows the post count in large text, then the beam count, the rafter count and the screw count below it. The bar under the result shows the mix of the job: posts, rafters and beams in proportion.

The next-step line reminds you to buy two beams at your full pergola length, and rafters at your full width. Buy the beams first and check them for straightness at the yard, because a bent beam is hard to fix once it is up. A beam that bows by even half an inch will show in the finished pergola.

Worked example: a 12 by 10 foot pergola

Take a pergola 12 feet long and 10 feet wide. The length is 12 feet, so four posts are enough: one at each corner. The beams are two, one on each side, each 12 feet long. Rafters run across the 10 foot width, 16 inches apart. Ten feet is 120 inches, and 120 divided by 16 is 7.5, so the tool gives 8 rafters, including the edge rafters.

Screws are 8 rafters times 4 screws, which is 32, plus 16 for the beam joints, which is 48 screws in total. Compare that with a longer pergola, 16 feet by 12 feet. The length is over 12 feet, so the tool gives 6 posts. Rafters are 144 inches divided by 16, which is 9, plus one, which is 10 rafters. Screws are 10 times 4 plus 16, which is 56. The longer pergola needs more of everything, and the tool shows exactly how much more.

Who uses this calculator

Homeowners building a garden pergola use it most. They know the size they want for shade over a patio or a hot tub, but they have never counted rafters before, and the six-post rule for long pergolas is new to them. The tool turns a confusing list into four plain numbers they can hand to the timber yard.

Builders use it to quote jobs quickly, and DIYers replacing an old pergola use it to check their count before they order.

Honest limitations

This calculator counts a simple rectangular pergola with a flat top. It does not count shade cloth, lattice, roof panels, or a solid cover, and those need their own material. It does not count the concrete for the post footings, the post anchors that fix the posts to the ground, or the stain and sealer that protect the wood.

The post count also assumes level ground and a standard beam size. A pergola on a slope needs longer posts on the low side, and a very wide pergola may need thicker beams than the standard size. Check your local building rules before you build, and ask the timber yard to check your list if the pergola is large.

Frequently asked questions

Why six posts for a long pergola? Because a beam longer than 12 feet sags in the middle under its own weight and the weight of the rafters. A middle pair of posts supports the beam at the centre and keeps the top level.

Why 16 inches between rafters? Because 16 inches is the standard spacing for garden structures. Wider spacing lets the shade break up into stripes, and narrower spacing costs more lumber for no real gain.

How long should the rafters be? As long as the pergola is wide, plus a little overhang on each side if you want the classic look. The tool counts the rafters; the length is your pergola width.

Do I need concrete for the posts? Yes, in most cases. Posts set in concrete last far longer than posts set in soil, and they stay straight.

También disponible en español: Cuánta madera para una pérgola – Postes y vigas según el tamaño, gratis en línea

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top