Count siding boards before you buy
Siding is sold by the board, and guessing the count is how you end up back at the store twice. Too few boards and the job stops halfway. Too many and you paid for boards you will never use. This calculator counts the boards from your wall area, adds ten percent spare for cuts and mistakes, and counts the starter strips for the bottom row.
The maths is simple. Each board covers a fixed area, which you find on the product label or the store listing. Divide the total wall area by the coverage of one board and you get the exact board count. Then add ten percent, because cuts around windows, doors and corners always waste some material. Round up to a whole board, because the store will not sell you part of a board.
Starter strips are the thin strips that go along the bottom of the first row of siding. They hold the first board at the right angle. The tool counts them from your wall length divided by the strip length, so a 40 foot wall with 12 foot strips needs four strips.
How to use the calculator
Enter the total wall area in square feet. Measure each wall, multiply length by height, and add the walls together. Subtract the area of large windows and doors if you want a tighter count, or leave them in for a little extra safety margin. Then enter the coverage of one board in square feet, your wall length in feet, and the starter strip length, usually 12 feet.
Press the button and the tool shows the boards needed, the exact count before waste, and the starter strips. The bar shows how much of the total is real coverage and how much is spare. The next-step line tells you the shopping list in plain words, so you can read it off at the store.
Worked example: a 200 square foot wall
Take a wall area of 200 square feet and boards that each cover 6 square feet. The exact count is 200 divided by 6, which is 33.3 boards. Add ten percent spare and you get 36.7, which rounds up to 37 boards. That is the number the tool shows.
For a wall length of 40 feet with 12 foot starter strips, the tool divides 40 by 12 to get 3.3 and rounds up to 4 strips. Your shopping list is 37 boards and 4 starter strips. If the boards cost 8 dollars each, the boards alone cost 296 dollars, which the maths in the tool confirms as 37 times 8.
Who uses this calculator
Homeowners doing their own siding use it before a trip to the hardware store, because it turns a guess into a list. Small contractors use it to price a job, since boards are a small cost but a wrong count still wastes a trip. Renovation crews use it to order for a whole house at once, wall by wall.
Students on building courses use it to learn how material estimates work. The ten percent waste rule is the same idea used across the building trade, and siding is a clear example because every cut around a window makes the waste visible.
Honest limitations
This calculator counts boards for flat walls. It does not count trim boards for windows and doors, corner boards, or the extra pieces around gables and dormers. If your house has many windows, add a few extra boards beyond the ten percent, or ask the store to check your numbers.
It also assumes every board covers the same area. Boards with different widths or different overlap cover different areas, so check the coverage figure on the exact product you will buy. And the ten percent spare is a rule of thumb: a careful worker may need less, and a first-timer may need more.
Frequently asked questions
Why add ten percent spare? Cuts around windows, doors and corners waste material, and boards sometimes arrive damaged. Ten percent covers the normal waste on a straightforward wall.
Do I subtract windows and doors from the wall area? You can, and it gives a tighter count. Many people leave them in, because the extra boards cover the waste around the openings anyway.
What are starter strips? Thin strips fixed along the bottom of the first row. They hold the first board at the right angle so the siding lies flat and sheds water.
How do I find the coverage per board? It is on the product label or the store listing, often as square feet per board. If the listing gives square feet per box, divide by the boards in the box.
También disponible en español: Cuánto revestimiento necesito – Tablas según la superficie de la pared, gratis en línea
