What is a board foot
A board foot is the unit lumber yards use to price wood. One board foot is a piece of wood 12 inches long, 12 inches wide and 1 inch thick, which is 144 cubic inches. Any board can be turned into board feet with one formula: thickness times width times length, all in inches, divided by 144.
That is why a long thin board and a short thick board can cost the same: they hold the same volume of wood. The lumber trade prices by volume, not by length alone, so the board foot is the fair way to compare a 2 by 6 with a 4 by 4. This tool does the division for you, for one board and for a whole cut list.
How to use the calculator
Type the thickness, width and length of your board in inches. A common board is a 2 by 6 that is 8 feet long, so you would type 2, 6 and 96, because 8 feet is 96 inches. Then type how many boards you need, and the tool shows the board feet for one board and for all of them together.
If you know the price per board foot, type it in the last box and the tool adds the cost too. The bar under the result shows where your total sits on a scale up to 100 board feet: under 10 is a small job, 10 to 50 is a medium job, and over 50 is a big job that deserves a waste allowance.
Worked example
Take one board that is 2 inches thick, 6 inches wide and 8 feet long. First turn the length into inches: 8 feet is 96 inches. Then the maths is 2 times 6 times 96, which is 1,152, divided by 144, which is 8 board feet. One such board is 8 board feet.
Now take ten of those boards. Ten times 8 is 80 board feet in total. At a price of 4.50 dollars per board foot, the cost is 80 times 4.50, which is 360 dollars. A shorter example: one board of 2 by 6 by 8 inches is 2 times 6 times 8 divided by 144, which is 0.67 board feet. The formula is the same at any size.
Why lumber is sold this way
Lumber comes in many sizes, and a yard cannot price every size by the piece. Board feet let the yard price by volume, so a customer pays for the wood they take, whatever the shape. A 1 by 12 that is 12 feet long is 12 board feet, and a 2 by 6 that is 12 feet long is also 12 board feet, because both hold the same volume.
Hardwood is almost always sold by the board foot, while softwood for building is often sold by the piece at a set length. Even then, the board foot is the way to compare two yards: if one yard charges 4 dollars a board foot and another charges 5, the first is cheaper for the same wood, whatever the board sizes are.
Honest limitations
The tool uses the sizes you type, which are nominal sizes. A board sold as a 2 by 6 is really about 1.5 by 5.5 inches after drying and planing, but the trade still counts it as 2 by 6 for pricing. That is normal, and every yard does it the same way, so the tool matches how you will be charged.
The tool also cannot see waste. Every cut leaves offcuts, and some boards have knots or bends you will cut around. Add about 10 percent to your total for waste, more if you are new to woodworking or the boards are rough. And always confirm the price per board foot with the yard, because it changes with the species and the grade.
Frequently asked questions
How many board feet in a 2x4x8? A 2 by 4 that is 8 feet long is 2 times 4 times 96 divided by 144, which is 5.33 board feet.
What is the board foot formula? Thickness in inches times width in inches times length in inches, divided by 144. If the length is in feet, multiply it by 12 first, or use thickness times width times length in feet divided by 12.
Is a board foot the same as a square foot? No. A square foot is area, 12 by 12 inches flat. A board foot is volume, 12 by 12 by 1 inch thick. A 1-inch board has the same number in both, but a 2-inch board has twice the board feet of its square feet.
How much extra wood should I buy? About 10 percent extra for cuts and waste is a good rule. Buy 15 percent extra for your first project or for rough-sawn wood.
También disponible en español: Calculadora de pies tabla de madera – Pies tabla según las medidas, gratis en línea
